Wilson Repeater Store
High Quality Wilson Electronics Products

Wilson 801201 Wireless Dual-Band 3-watt Vehicle Amplifiers
Copyright (c) 2009 WilsonRepeaterStore.com  All Rights Reserved
Wilson Electronics' Best and Most Powerful Mobile Cellular Amplifer
The Wilson 801201 dual band
cellular amplifier is Wilson
Electronics' strongest and
most powerful amplifier.  
Designed specifically for
in-vehicle use, it creates a
cellular hotspot within your
vehicle where one or more
cell phones or aircards can be
used.  
Part Number
801201
Frequency
824-894 MHz / 1850-1990 MHz
Gain
40 dB / 45 dB
Max Output Power
3 watts
Max RF
+35 dBm / +10 dBm
Noise Figure
3 dB nominal
Flatness
± 3 dB / ± 4 dB
Isolation
> 90 dB
Power
6 V, 3 A max
Connectors
FME-Male 50 ohms
Dimensions
4.5 x 3.5 x 1.25 (inches)
11.43 x 8.9 x 3.2 (cm)
Weight
1.5 lbs / 0.7 kg
Specifications
  • No physical connection to your cell phone or aircard
  • Works with CDMA, TDMA, GSM and data
  • Passes TIA/EIA-98-E transmit tests for evaluating
    CDMA cellular phones
  • Power control logic ensures maximum output power
    is within cellular standards
  • Automatic gain adjusting
  • Gain indicator lights
  • Automatic shutdown on overload
  • Allows multiple phones and cellular data cards to be
    used simultaneously
  • Maximum 3 watts output power
  • DC power-supply included - AC power supply sold
    separately
  • Slim low profile antenna included (301127)
  • FCC and IC Type Accepted
Additional Information
The Wilson 801201 is available in several different kit
configurations.  Setup is similar with all the kits and can
easily be done in a few minutes.

An outside antenna is needed to communicate with the cell
tower.  Magnet mount antennas like the 12" 301103
(801212, 801213 kits) and the 4" 30113 are placed on the
roof of the vehicle.  This outside antenna is connected to
the 801201 cellular amplifier.  A good place for the
amplifier is under the front seat.  From this location the
amplifier can be plugged into the vehicle's power supply.  
The inside low-profile broadcast antenna is also connected
to the cellular amplifier and can be placed on the side of
the headrest or driver seat.  The Wilson 301146 universal
cradle with built-in antenna can be used in place of the
low-profile antenna.
Click here to view Installation guide for 801201, 801212
Wilson 801201 Dual-Band Wireless Amplifier
Kit comes with 801201 amplifier, inside low-profile broadcast antenna, and vehicle power supply. Outside antenna is NOT included with this kit.
$299.95
Wilson 801212 Dual-Band Wireless Kit
Kit comes with 801201 amplifier, inside low-profile broadcast antenna, vehicle power supply and outside 12" magnet mount antenna. Complete kit.
$309.95
Wilson 801213 Dual-Band Wireless Kit
Kit comes with 801201 amplifier, universal cradle with built-in antenna, cradle mounting hardware, ear bud vehicle power supply and outside 12" magnet mount antenna. Complete kit.
$329.95
Toll Free: 1-866-912-3444
Direct: 1-435-634-6800