 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Wilson Repeater Store High Quality Wilson Electronics Products |
Wilson 811210, 811214 SIGNALBOOST 3 Watt Vehicle Amplifiers |
| Copyright (c) 2009 WilsonRepeaterStore.com All Rights Reserved |
 | |  | |  | |  | |  | |  | |  |
Wilson Electronics' low cost dual band wireless amplifier for around town low signal problems
Wilson's affordable
SignalBoost 3 watt amplifier
is the perfect choice for the
user looking to improve
cellular signals for a single
cell phone or data card on
the road or indoors.
Attaches to any phone or
data card.
SignalBoost 3 watt amplifier
is the perfect choice for the
user looking to improve
cellular signals for a single
cell phone or data card on
the road or indoors.
Attaches to any phone or
data card.
|
Specifications
Features
- Works with all Cellular/PCS carriers, NOT iDEN
- Connects to All phones and data cards with a
Universal Ultra-Slim Antenna using a Velcro patch - Significantly improves voice and data signal quality
- Increases data communications rates needed for 3G
technologies - Receives and transmits better than you cell phone
- Extends cell phone battery life
- Works great in mobile, desktop, RV and marine
applications - Easy to install and use. Setup in minutes
- Works on all generations of CDMA, TDMA and GSM
- DC power supply included, AC power supply sold
separately - FCC and IC Type Accepted
Additional Information
The Wilson 811210 is available in several different kit
configurations. Setup is similar with all the kits and can
easily be performed in a few minutes.
An outside antenna is needed to communicate with the cell
tower. Magnet mount antennas like the 12" 301103 are
placed on the roof of the vehicle. This outside antenna is
connected to the 811210 cellular amplifier. A good place
for the amplifier is under the front seat. From this location
the amplifier can be plugged into the vehicle's power
supply. The inside ultra-thin broadcast antenna is also
connected to the cellular amplifier and can be placed on
the back of any phone using Velcro. The Wilson 301146
universal cradle with built-in antenna can be used in place
of the ultra-thin antenna.
The Wilson 811210 is available in several different kit
configurations. Setup is similar with all the kits and can
easily be performed in a few minutes.
An outside antenna is needed to communicate with the cell
tower. Magnet mount antennas like the 12" 301103 are
placed on the roof of the vehicle. This outside antenna is
connected to the 811210 cellular amplifier. A good place
for the amplifier is under the front seat. From this location
the amplifier can be plugged into the vehicle's power
supply. The inside ultra-thin broadcast antenna is also
connected to the cellular amplifier and can be placed on
the back of any phone using Velcro. The Wilson 301146
universal cradle with built-in antenna can be used in place
of the ultra-thin antenna.
Click here to view Installation guide
Kits using the Wilson 811210 amplifier
Below are several kits that have been configured with the
Wilson 811210 dual band cellular amplifier.
Below are several kits that have been configured with the
Wilson 811210 dual band cellular amplifier.
Universal Ultra-Slim
The 301143 Ultra-Slim antenna used with the 811210
easily be placed on the back of any cell phone using the
Velcro provided with the antenna.
easily be placed on the back of any cell phone using the
Velcro provided with the antenna.
| International SignalBooster Amplifier 900/1800MHz |
| International SignalBooster Amplifier 900/2100MHz |
| Optional window mount accessory shown |
| These amplifiers are designed for UK, Europe, Asia, Africa etc (not North America). |
| Toll Free: 1-866-912-3444 Direct: 1-435-634-6800 |